Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
Information Name: | Supply YN30A internal combustion rock drill |
Published: | 2012-03-13 |
Validity: | 150 |
Specifications: | All |
Quantity: | 0.00 |
Price Description: | Negotiable |
Detailed Product Description: | YN30A internal combustion rock drill Features 1, YN30A by the internal combustion rock drill is a small gasoline engine, compressor, rock drill Trinity jackhammer combination of tools. 2, YN30A internal combustion rock drill operation, compressed air from the purge itself the eyes of the rock blasting powder. 3, Weight only 30KG, easy to carry, suitable for high mountains, no power, no air pressure equipment in areas of relatively high mobility is particularly suitable for temporary works. 4, perforated in the rock can be vertically downward, horizontal, up less than 45 °. Bore down to the deepest depth of the vertical 6m. YN30A use of internal combustion rock drill 1, the machine is suitable for the rock bore, if replacement parts can be replaced by a few breakers and compactors for a variety of broken shovel digging, digging, splitting, tamping and so on. 2, both in the mountains, plains; both in the heat of +40 ° C or -40 ° C cold areas, can work. The machine has a wide range of adaptability. YN30A internal combustion rock drill machine Technical parameters: YN30A technical specifications of internal combustion rock drill Weight 28 kg Contour length x width x high dimensions 760x335x235 Engine type single cylinder air-cooled two-stroke gasoline engine No float type carburetor Ignition contact-type platinum 185 cm3 engine displacement Engine load speed (measured in drilled five holes) 2700 ~ 3000 r / min Engine idling ≤ 2200 r / min Rod idle speed 180 r / min Solder the end of drill rod hex shank size 22x108 mm ≥ 20J impact energy Bore speed (five-hole average) ≥ 200 mm / min Maximum bore elevation angle 45 ° ≥ 6 m depth of the deepest perforated Fuel tank capacity ≥ 1.65 L Fuel consumption (measured in drilled five holes) ≤ 0.13 L / m Gasoline and oil mix ratio (by volume) 12:1 |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility