Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
- home > Supply > Supply multi-function rolling bending machine (bending machine square pipe) (pipe bending machine)
Information Name: | Supply multi-function rolling bending machine (bending machine square pipe) (pipe bending machine) |
Published: | 2012-03-13 |
Validity: | 180 |
Specifications: | Complete |
Quantity: | 1.00 |
Price Description: | Negotiable |
Detailed Product Description: | DWQJ-G76 multi-function pipe bending machine DWQJ-G76 multi-function rolling bending machine (DWQJ-G76 multi-function rolling bending machine) (square tube bending machine) (pipe bending machine) DWQJ-G76 multi-function rolling bending machine is mainly used in construction decoration industry, with a curved stainless steel and other non-ferrous metals with the book wall garden tube, square tube, rectangular tube. Bent as needed to any of arc. Use of aircraft in Bend, does not require heating or sand filling process, according to the different needs can be cold-formed shape. The smooth curved arc products with garden, clear, distortion and other small features. The machine is designed simple, DWQJ-G76 multi-function rolling bending machine operational flexibility, long life, with more than mold. With a machine function. And able to 6M long, diameter 25.4 ¢ below the stainless steel tube bent into a one-time park laps, the rolling circle gradually shrunk to a small park circle spring special features. DWQJ-G76 multi-function rolling bending machine main technical parameters: Model DWQJ-G76 Tube active mode mm Ф16, Ф19, Ф22, Ф25, Ф32, Ф38, Ф51, Ф63, Ф76 Passive mode mm Ф16, Ф19, Ф22, Ф25, Ф32, Ф38, Ф51, Ф63, Ф76 RHS active mode mm 16,19,22,25,30,38,40,50 Passive mode mm 16,19,22,25,30,38,40,50 Wall thickness (Mm) 0.5-2 Motor Power (Kw) 1.5 Voltage (v) 380/220 Weight (kg) 290 Dimensions (Cm) 60 × 89 × 109 DWQJ-G76 multi-function rolling bending machine to use l, the multi-function switch rolling bending machine screw, bearing wheel and workpiece contact with the mold and being curved parts coated with grease. 2, according to the curved pipe size, select the appropriate bending mode, mounted on the piston rod to the top, and the two supporting wheels the size of the corresponding slot for the bending mode, special attention should be on supporting round the edge of the flange surface of the corresponding size of hole , the "maximum size of the outermost hole. and so on. to avoid the location of two rounds of asymmetric contractors, building damage and mold parts. 3, place a piece on the flange will be covered, first with the fast pump to the workpiece to bend molded pieces, and then slowly pump pressure to the desired angle of the workpiece, turn off after a good opening, work will automatically reset the piston, and open on the flange, the piece is taken out. Fourth, note: 1, multi-function rolling bending machine check before the first use of the oil tank is adequate, if less than to be filled. 2, switch before work - scheduled to be shut; otherwise not hit on the pressure, and to loosen the oil drain plug for the fuel tank ventilation. 3, the diameter of the pipe bend with the bending mode must fit the groove, or the phenomenon of the workpiece will have clashing or split up the mold. 4, the seam welded pipe at the bend in the positive to the outside or the being inside. Two bearing the bending process to turn the wheel and workpiece in the sliding groove wheel bearing, if not move one side should stop operating. 5, rolling bending machine multifunction devices usually do a good job cleaning and maintenance work to clean fuel, - fixed more than 80 mesh strainer to filter through the oil filter device to be cleaned regularly 6, multi-function rolling bending machine with 15 machine oil. Fifth, wearing parts For the convenience of the user maintenance, will be wearing multi-function rolling bending machine spare parts into the bag seal. Possible failures and trouble shooting: Failure Cause Remedy 1, the piston rod out after a certain length of the shake handles, entry bar stretched it out a shrink. Loosen the oil plug is not screwed Songane oil drain plug The oil pump in the valve port ball valve does not seal out the oil does not have the whole garden waste, should be replaced with clean oil, replace the ball. 2, large and small leakage in the pump rod at the seal ring damage will be replaced with spare parts bag 3, pressure switch at the oil leakage switch ring is too loose screws and remove the limit switch, tighten the squeeze ring 4, the top peak of the staff out of weakness, not work. Switch to the top of the ball did not seal the top securely bad switch or drop balls balls balls tighten exchange switch, without the ball, ball should be added. 5, the top plunger rod to the top ring damage oil change 14 × 2.4 O-ring (not included) 6, large and small pump to fill the filter inside the fuel filter attached to the garbage or serial number less than 12 parts Unscrew, clean the mesh with gasoline and fill up. 7, the mold mounting hole split items out of the mold when lateral load Such as: bend over and then bend the workpiece position is not put wheel bearings are checked whether the location of two symmetrical, bearing fit at the wheel and workpiece coated with oil, place is the location of the second bend. 8, pick up the pump, also known to take the pump, return pump ball valve can not function properly reset the bar (15) out, so there is pressure on the piston in the handle seat (14) on the first beat with a few Lang can be reset to the next ball. Contact: Cheng Ning Tel: 0537 - |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility