Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
- home > Supply > Supply of electric cutting machine (pipe cutting machine) (pipe cutting machine) (pipe cutting machine)
Supply of electric cutting machine (pipe cutting machine) (pipe cutting machine) (pipe cutting machine)
Information Name: | Supply of electric cutting machine (pipe cutting machine) (pipe cutting machine) (pipe cutting machine) |
Published: | 2012-03-13 |
Validity: | 900 |
Specifications: | Complete |
Quantity: | 1.00 |
Price Description: | Negotiable |
Detailed Product Description: | Electric pipe cutting machine Electric cutting machine (pipe cutting machine) (pipe cutting machine) (pipe cutting machine) Pipe cutting machine: for diameter Φ60 ~ Φ219mm, Φ108-Φ219mm, Φ76-Φ325mm 3 ~ 10mm thickness of steel cutting can also be used for the same kinds of ductile iron pipe and plastic pipe specifications for cutting, so as to achieve the purpose of installing pipe. The construction, pipeline construction sector, an ideal tool. Electric pipe cutting machine Main technical parameters: Diameter mm Ф76-Ф325 Maximum wall thickness mm 10 Output speed r / min 23 Voltage V 380 Power W 750 Frequency HZ 50 Spindle speed 15rpm Weight 70kg Dimensions 680 * 680 * 650 Electric pipe cutting machine for use: 1, according to pipe diameter, select or auxiliary chassis roller tube placement. 2, after adjusting bracket height and height of the host, so that pipe in the level of required full length of pipe and wheel contact. 3, start the motor. 4, pulled the oil pump (jack) bar, the blade cut into the feed tube to increase the intensity when appropriate, to be knife cut into the tube to be backward stable, 1-3mm before the break when the feed slowly. Then disconnect the pipe itself. 5, release the oil pump (jack) shut down the motor oil drain screw, so that left the steel knife-edge 30-40mm, remove the tube and continue to the next job. 6, do not hit the blade edge with a hard object, prop shaft and the rack shaft mouth care to prevent harm to the blade edge and the roller installation accuracy. Note: 1, the blade must be securely installed. 2, the process of cutting pipe, the body can not shake, cutting edge department should add appropriate amount of oil lubrication. 3, non-motor wet, rain. 4, is not so over-stretched extension spring. Contact: Cheng Ning Tel: 0537 - |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility