Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
Information Name: | Supply hydraulic track lifting machine (YQD-200 Hydraulic track lifting machine) |
Published: | 2012-03-13 |
Validity: | 30 |
Specifications: | Complete |
Quantity: | 1.00 |
Price Description: | Negotiable |
Detailed Product Description: | YQD-200 hydraulic machine from the Road Structural features Hydraulic track lifting machine is the manual dual piston pump, fuel tank, relief valve, from the road levers, floor and other major component parts, has the following characteristics: It tank equipped with pressure relief valve, system pressure is conducive to use 72mpa a smaller bore, to the requirements of small size and light weight. When the oil pressure exceeds 72mpa, the relief valve automatically unloading, played overload protection. 1. Cylinder has a bleed screw on the top cover, easy to exhaust the air cylinder. 2. Pump oil transfer pump handles libraries in addition to force, there is also limit the role, when it rose to the provisions of cylinder height, the limit block limit exposure to leverage from the road. Working principle of hydraulic pressure from the Road The handle into the handle sets, lever handle down, the pressure hydraulic piston pump by hand into the cylinder, the cylinder increase, and then driven from the road through the trunnion lever, with leverage from the road from the road round to the front of the lift rail . Technical parameters of the hydraulic machine from the Road 1.'s Largest power from the Road 196KN 5. Grip force 450N 2. Rated oil pressure 72MPa 6. Hydraulic oil, machine oil 15 # 3. From the road wheel lift 120mm 7. For track-type 24 - 75kg / m 4. No-load efficiency of> 4.5mm 8. Net weight 28kg Notes from the Road Machine Hydraulic 1. Should be checked before using the hydraulic oil tank is adequate; whether the oil spill; empty cylinder without observing the handle up and down shaking beats and creepy phenomenon; observe whether the fuel tank of gas; return valve is working properly; the for loose fasteners. Only when no abnormal operation. 2. Shake the handle from the road, in the beginning no load or low load conditions, lever handle range can be bigger in order to improve efficiency. When the track lifting heavy weight, the lever handle range should not be too large, to avoid damage to the pump core and the casing. 3. The Road from Tao operations from outside the installation, including the boundaries are not invasive, but the operation encountered by the train, track lifting machine and operating workers to evacuate the same time line. No time to evacuate in an emergency unit from the road, they must loosen the oil return valve. Ensure road safety. From the road is complete, loosen counter-clockwise back to the oil unloading valve, under the weight of the rails, the hydraulic oil through the oil return valve to be pressed back to the tank. Remove from the Dao, with their feet trample tank to full reset. Contact: Miss Cheng Tel: 0537 - |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility