Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
- home > Supply > Supply deduction of the machine, pipe machine, reduction of the machine, lock the machine
Information Name: | Supply deduction of the machine, pipe machine, reduction of the machine, lock the machine |
Published: | 2012-03-13 |
Validity: | 360 |
Specifications: | DX - 68 |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Deduction of the machine The DX68 lock machine | lock the machine deduction of the machine | Hose crimping machine | shrink machine | hydraulic lock the machine, hydraulic deduction of the machine, liquid compression tube machine, sewing machine, hose crimping machine hose shrink tube machine DX68-lock the machine is mainly used for high pressure hose assembly in the mechanical engineering withhold processing, but also to withhold the two-way elbow, large elbow, and special-shaped head. Deduction of the machine is compact and lightweight, powerful, low noise, easy to operate. Withhold the amount of fine adjustment by the ruler. Eight die holder together with the precision of the dual bevel guide, so that the die holder decile more evenly. Second, the main technical characteristics Withhold range: Φ6-Φ51mm Maximum deduction pressure: 449 tons Scale accuracy: 0.02mm Rated pressure: 31.5MPa Pump displacement: 5ml/rad (380V) 2.5ml/rad (220V) Dimensions: 670 (L) x 490 (W) × 780 (H) mm. Third, pay attention To the extent possible, withhold the connector placed in the mold center, do not pressure on the hex nuts. 2, to prevent tools and other foreign matter into the lock. 3, each time after work is completed must be made eight mold base open to the greatest extent, it will give the spring in the open state. Doing so will damage the spring. 4, work, do not put his hand into the lock. 5, maintenance must be cut off. Fourth, maintenance maintenance Should always check the hydraulic oil in the tank, found that the fuel shortage to make up the oil in a timely manner; of oil pollution to filter or replacement. Lock to maintain the internal cleanliness, in order to avoid processing debris and mold into the lock cylinder, and affect the normal use. Timely wipe mode specific the withhold connector into the debris, and often to the mode specific to add the right amount of butter for lubrication. |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility