Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
Information Name: | Supply of resin anchoring agent, anchoring agent, cement anchoring agent |
Published: | 2012-03-13 |
Validity: | 300 |
Specifications: | 2335 |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | Resin anchoring agent Anchoring agent, resin anchoring agent, cement anchoring agent, anchoring agent, resin anchoring agent Anchoring agent resin anchoring agent production resin anchoring agent sales resin anchoring agent Anchoring agent The company produces high-strength anchor agent dedicated unsaturated polyester resin with marble powder, accelerators and accessories, by a certain percentage from the preparation of clay-like bonding material, with a special polyester film, clay and hardener The split was a two-component packaging drugs roll. This product has a long shelf life, high strength anchor to facilitate the construction and excellent performance. Supporting the use of metal or glass steel bolt in underground engineering, slope support, the equipment, installation of the vertical shaft, connected components of the building, equipment foundation anchoring, etc. has been widely used. Is the best anchoring material in the modern anchor engineering. The resin anchoring agent has a high early strength; performance of construction, from site constraints; no rust on the steel, and good impermeability advantage Anchoring agent in the building, also known as structural anchoring adhesive for reinforced anchor bolts. : Resin anchoring agent and main technical performance: An early strength of the product is high, half-hour strength of up to 12-18MPa, 4 hours up to 25-30MPa, 28 days up to 50-60MPa; Specification model (see table) (3) the performance of construction is not subject to the site constraints; On the steel from corrosion, good impermeability; (5) The products are micro-expansion, linear expansion rate is 3 per 1,000; Model Size (mm) curing time (min) compressive strength (MPa) Fast MNH32/250 5-10 hours and 22 Medium-speed MNH32/250 10-20 hours and 20 Slow MNH32/250 30-60 24 hours and 30 Can produce different specifications based on design requirements and engineering : Resin anchoring agent to use: A water or wind will anchor the hole clean, the right amount of anchoring agent into the water, soak for 1-2 minutes, do not take (Note: soak time must not be too long until the blisters). B, in the initial setting time of calibration, anchoring agent into the anchor hole, then insert the bolt with the fastest speed. Common Specifications: The weight of the model specifications for drilling each box count ?3530 35x300 550 ± 10 42 ± 2 50 ?3537 35x370 700 ± 10 42 ± 2 40 ?2850 28x500 640 ± 10 32 ± 2 40 ?2835 28x350 400 ± 10 32 ± 2 40 ?2335 23x350 300 ± 10 28 ± 2 50 ?2360 23x600 500 ± 10 28 ± 2 50 |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility