Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8064428
![](http://i.b2b168.com/e/tag_cmjz.gif)
- Product Categories
- Friendly Links
Information Name: | HA series bearing heater supply |
Published: | 2012-03-13 |
Validity: | 300 |
Specifications: | HA-1 |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | HA series bearing heater Bearing heater - Ji Ning Xinlong mining Bearing Heaters Type: HA-1 bearing heater HA-1 bearing heater HA-1 bearing heater ELDC-1 bearing heater ELDC-3.6 bearing heater ELDX-3.6 bearing heater ELDX-8 Bearing Heaters Use HA series bearing heater, used for bearings, gears, bushings, sleeve diameter rings, pulleys, shrink rings, connectors and other types of metal parts for heating, the expansion by heat, to the assembly of interference needs. Second, the structure HA series bearing heater control box by the combination of host and one installed in the primary car, mobile structure, easy and flexible application-site construction, removable yoke is directly used to wear a set of bearings or other parts of the heating used. HA Series Bearing Heater Specifications: Model Project HA-1 HA-2 HA-3 Rated Power 2.2KVA 3.3KVA 5.5KVA Rated voltage 220V 220V 380V Rated Current 10A 12A 15A Temperature Temperature Temperature control Maximum heating temperature 300 ℃ 300 ℃ 300 ℃ Heating the workpiece diameter Ф30-70 mm Ф 70-100 mm Ф100-200 mm Maximum diameter of the largest Ф360 Ф250 mm mm mm maximum Ф440 Width 110 mm 115 mm 140 mm Weight 45 kg 55 kg 80 kg Demagnetization effect of residual magnetism ≤ 1.0mT Five procedures 1, the yoke placed on the surface of the host side. 2, a control switch will plug into the power outlet. 3, check the ground wire is good, is powered with a test pencil test. 4, pressing the start button, the host power. 5, check the yoke on the ground should be no voltage. 6, press the Stop button to power off the host, stop heating. 7, depending on the specifications of the bearings or other parts, choose a different yoke put on, this yoke on the top surface of the host, should fit flat. 8, when heated, the sensor should be inserted "sensor socket", and the sensor close to the workpiece is heated. 9, when the bearing is heated to the required temperature, it will automatically turn off the power switch or press stop. 10, stop heating, the yoke to the left or right, and then remove the bearing back into the host after the yoke top. 11, if the re-use, continuously heating the bearing, simply by re-processing of the bearing sleeve into the yoke, click the Start button Contact: Cheng Ning Tel :0537 -2,886,667 Mobile: 15053792050 Work QQ: 1729583493 Want No.: cnfd5201 Website: http://cnfd5201.b2b.youboy.com/ http://cnfd5201.cn.alibaba.com/ |
Admin>>>
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 53803 visitor
Copyright © GuangDong ICP No. 10089450, Mining Co., Ltd. Jining hillo All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility